ML Knives
TM
(518) 843-7216
Copyright © Matthew Lesniewski ML Knives
| As most of my Customers know. Custom knives are made per your order all the time.. From sketches you have sent or a Special request... From you...THANK you again for all your support..... Below are knives available per your custom order! ...Each are Hand forged and original... |
WDSET: Drop Point Woods set.. Great Design knife for the hunter or woods runner..
Knife: Hand forged full tang 1095 High Carbon Steel....4" inch blade 4 1/8" handle.. Pattern and patina aged finish blade Tiger Maple,
Handle with brass pins...If a special handle material is wanted me. Great Hunting or bush knife
Hand forged fire steel and hand made antler tine ferro rod. Price with Hand stitched Sheath as shown below $195.00 plus shipping
Knife: Hand forged full tang 1095 High Carbon Steel....4" inch blade 4 1/8" handle.. Pattern and patina aged finish blade Tiger Maple,
Handle with brass pins...If a special handle material is wanted me. Great Hunting or bush knife
Hand forged fire steel and hand made antler tine ferro rod. Price with Hand stitched Sheath as shown below $195.00 plus shipping
STAG Knives.. Blade designs below are all great for many uses, hunting knives, Guides, field use, more..
Hand forged full tang 1095 High Carbon Steel....blade lengths 4 to 4 14"" inch handles to balance. Pattern aged finish or satin clean
finish. Handle material High grade Elk Stag. Brass or steel pins. Price with Hand stitched Sheath as shown below $159.00 and shipping
Hand forged full tang 1095 High Carbon Steel....blade lengths 4 to 4 14"" inch handles to balance. Pattern aged finish or satin clean
finish. Handle material High grade Elk Stag. Brass or steel pins. Price with Hand stitched Sheath as shown below $159.00 and shipping
SHRTSURV: Short Survivalist. This is a handy blade profile..Great design for Everyday Carry knife, Pocket, Pack,
shooting bag and can be set up as a Neck Knife as well.
Hand forged full tang 1095 High Carbon Steel....blade length 3" Handle 3 1/4" Rear Steel Lanyard hole.Pattern aged finish. Handle
material Tiger maple. Steel or Brass Pins....Price with Hand stitched multi carry sheath Price $99.00 these are 7.00 to ship Stateside
shooting bag and can be set up as a Neck Knife as well.
Hand forged full tang 1095 High Carbon Steel....blade length 3" Handle 3 1/4" Rear Steel Lanyard hole.Pattern aged finish. Handle
material Tiger maple. Steel or Brass Pins....Price with Hand stitched multi carry sheath Price $99.00 these are 7.00 to ship Stateside
WDSET: Drop Point Woods set.
KEPFISH: Kephart Fisher
KEPFISH: Kephart Fisher. This is a companion knife to
the kephart knife. A lightweight knife that has a fish scaler
spine, great for fresh water trout, bass, handy for many uses.
Hand forged full tang 1095 High Carbon Steel....blade length about 3"
Handle 3 1/4" Clean hand rubbed satin finish. 3/32" spine thickness.
Handle material Black Walnut, tiger maple, ash, oak. Steel or Brass
Pins....Price with Hand stitched belt or neck sheath Price $129.00
these are 7.00 to ship Stateside
*Every aspect of all of my knives are handmade including the "scaler"
at the spine, so teeth will vary a bit from knife to knife each tooth is
done by hand.
the kephart knife. A lightweight knife that has a fish scaler
spine, great for fresh water trout, bass, handy for many uses.
Hand forged full tang 1095 High Carbon Steel....blade length about 3"
Handle 3 1/4" Clean hand rubbed satin finish. 3/32" spine thickness.
Handle material Black Walnut, tiger maple, ash, oak. Steel or Brass
Pins....Price with Hand stitched belt or neck sheath Price $129.00
these are 7.00 to ship Stateside
*Every aspect of all of my knives are handmade including the "scaler"
at the spine, so teeth will vary a bit from knife to knife each tooth is
done by hand.
Kephart Fisher shown with a
custom neck sheath
custom neck sheath
Kephart Fisher shown with black walnut
Backside view of multi
carry neck or belt sheath
carry neck or belt sheath
A
B
C
D
E
F
Hand Forged Fire Steels
Fire steels such as shown below have been used for many years for fire making.
Sizes on these range from 3" across to smaller but can be made to your specs.
These are sold without flint, char cloth or tinder. Great To use today as well
from the camp, woods and survival
$18.00 each plus shipping
Fire steels such as shown below have been used for many years for fire making.
Sizes on these range from 3" across to smaller but can be made to your specs.
These are sold without flint, char cloth or tinder. Great To use today as well
from the camp, woods and survival
$18.00 each plus shipping
Hand Forged Snake shaped Fire Steels
These are free forged and each are unique.
$25.00 each plus shipping
These are free forged and each are unique.
$25.00 each plus shipping
Ferro Rod Fire
steels
These ferro rods are
1/4" around
and throw great spark.
With lanyard hole in
curly maple.
$29.00 plus shipping
with lanyard hole and
antler tine.
$19.00 plus shipping
steels
These ferro rods are
1/4" around
and throw great spark.
With lanyard hole in
curly maple.
$29.00 plus shipping
with lanyard hole and
antler tine.
$19.00 plus shipping
Combined with a hand
forged fire steel combo
$49.00 plus ship
forged fire steel combo
$49.00 plus ship
Wood Carver/Whittler. Wood Carvers and whittling Knife. These are great for carving spoons, walking sticks, and
more... Slip into a bag for taking a journey into the woods set on an old stump and carve.
Hand forged solid Full or hidden tang 1095 High Carbon Steel....
Blade length about 2" ....Handle 4 1/2" .....Clean hand rubbed satin finish. 3/32" spine thickness. Spine is rounded a bit for a more
comfortable feel on the thumb.
Hidden tang option $49.00
Full Tang Option $69.00 These are 7.00 to ship stateside
If you want a simple hand stitched leather sheath (blade cover) add 8.00
more... Slip into a bag for taking a journey into the woods set on an old stump and carve.
Hand forged solid Full or hidden tang 1095 High Carbon Steel....
Blade length about 2" ....Handle 4 1/2" .....Clean hand rubbed satin finish. 3/32" spine thickness. Spine is rounded a bit for a more
comfortable feel on the thumb.
Hidden tang option $49.00
Full Tang Option $69.00 These are 7.00 to ship stateside
If you want a simple hand stitched leather sheath (blade cover) add 8.00
Below are some pictures of a spoon I carved from a solid piece of ash using this carving knife. Ash is very hard and resilient and the
knife shown above worked out great. The only thing not carved on this soon with the knife above was the deep part of the bowl.
knife shown above worked out great. The only thing not carved on this soon with the knife above was the deep part of the bowl.
Completed Spoon
(518) 843-7216
EVD Carry Knife: Great Everday carry Knife. Handy for
game hunting, woods use, skinner, all around nice design.
Hand forged full tang 1095 High Carbon Steel....blade length about 2"
Handle 3 1/4" Pattern aged finish. 3/32" spine thickness.
Handle material Walnut,ash, oak. Steel or Brass Pins....Price with
Hand stitched belt sheath Price $85.00 these are 7.00 to ship Stateside
game hunting, woods use, skinner, all around nice design.
Hand forged full tang 1095 High Carbon Steel....blade length about 2"
Handle 3 1/4" Pattern aged finish. 3/32" spine thickness.
Handle material Walnut,ash, oak. Steel or Brass Pins....Price with
Hand stitched belt sheath Price $85.00 these are 7.00 to ship Stateside
Carry Knife shown with
black walnut handle
black walnut handle
EVD Carry Knife
Camp Butcher:
Excellent Camp Knife design
with early styling. Hefty enough
to handle camp work but will
also serve in camp cooking and
bush survival work.
Hand forged full tang 1095 High
Carbon Steel....blade length about 8"
Handle 5" Pattern and patina aged
finish. 3/16" spine thickness.
Handle material Walnut, ash, oak.
Tiger maple brass or steel pins over
brass washers..Price with Hand
stitched belt sheath $220.00 plus ship
Excellent Camp Knife design
with early styling. Hefty enough
to handle camp work but will
also serve in camp cooking and
bush survival work.
Hand forged full tang 1095 High
Carbon Steel....blade length about 8"
Handle 5" Pattern and patina aged
finish. 3/16" spine thickness.
Handle material Walnut, ash, oak.
Tiger maple brass or steel pins over
brass washers..Price with Hand
stitched belt sheath $220.00 plus ship
Aged black walnut handle shown
Coffin Steels
This style steel can be
set up for wearing
around the neck or
great for your camp
gear, survival gear,
hiking and more.
spark with sharp flint or
a ferro rod.
Sizes approximate:
Width about 1 1/8" wide
Heigth about 2 3/4"
about 1/8" thick
$19.00 plus ship
This style steel can be
set up for wearing
around the neck or
great for your camp
gear, survival gear,
hiking and more.
spark with sharp flint or
a ferro rod.
Sizes approximate:
Width about 1 1/8" wide
Heigth about 2 3/4"
about 1/8" thick
$19.00 plus ship
| Available Knives Gallery 1 Available Knives Gallery 2 Available Knives Gallery 3 Gallery of PAST Custom WORK Gallery of PAST WORK Page 2 Gallery of PAST WORK Page 3 PAST WORK EXTENDED |
| Hunting Bowies Special Order Special Order Page 2 Possible Hunting Bags Custom Kitchen Knives Kephart Gallery BOOKS Knife Sharpening FAQ contact |
SHRTSURV: Green canvas Micarta
option with full handle
option with full handle
Green canvas Micarta
Short Survivalist
4" handle 3" blade
Hand forged full tang
1095 High Carbon Steel....
Pattern aged finish.
Brass Pins and rear lanyard...
Price with Hand stitched multi carry
sheath $129.00 these are 7.00 to
ship Stateside
Short Survivalist
4" handle 3" blade
Hand forged full tang
1095 High Carbon Steel....
Pattern aged finish.
Brass Pins and rear lanyard...
Price with Hand stitched multi carry
sheath $129.00 these are 7.00 to
ship Stateside
Get a closer look at the
full handle survivalist
full handle survivalist
Short survivalist shown
with Tiger Maple
with Tiger Maple
SHRTSURV: Short Survivalist
SHRTSURV: Green canvas Micarta
Flat ground version..Edge from tip to hilt
Yello cord not included**
Flat ground version..Edge from tip to hilt
Yello cord not included**
To the Left:
Flat ground version. sharpened
from tip to hilt. (Darker color)
green canvas micarta shown after
use and age. 2 or 3 pin
handle..129.00 and ship
Flat ground version. sharpened
from tip to hilt. (Darker color)
green canvas micarta shown after
use and age. 2 or 3 pin
handle..129.00 and ship
| Full tang Carver with Tiger Maple $69.00 |
| Set of Full Tang Carvers Top: Antiqued Ash wood Bottom: antiqued Black Walnut |
| Full tang Carver with Tiger Maple $69.00 + Ship |
| Hidden Tang Carver $49.00 +Ship |
| Spine Shot of full tang Carver |
| Carver with hand stitched leather blade cover |
RED canvas Micarta
Short Survivalist
4" handle 3" blade
(This version has a beefed up
3/16" spine..exposed but end)
Hand forged full tang
1095 High Carbon Steel....
Pattern aged finish.
Brass Pins and rear lanyard...
Price with Hand stitched multi carry
sheath $139.00 these are 7.00 to
ship Stateside
Short Survivalist
4" handle 3" blade
(This version has a beefed up
3/16" spine..exposed but end)
Hand forged full tang
1095 High Carbon Steel....
Pattern aged finish.
Brass Pins and rear lanyard...
Price with Hand stitched multi carry
sheath $139.00 these are 7.00 to
ship Stateside
SHRTSURV: RED canvas Micarta
ML Knives Trail Fighter Knife
Hand forged full tang 1095 High Carbon Steel....6 1/4" inch blade 5" handle.. file worked thumb stops on spine..
Rear exposed steel but end...Tapered forward clip/swedge about 3" long.. 3/16" thick spine/tang.....
Pattern and patina aged finish blade. Handle material Black Dymonwood as shown below or black canvas micarta...
brass pins and lanyard hole. Hand stitched belt sheath with brass snap can be worn in a regular hanging fashion or higher on the belt.
Sheath Available in black as in photo or dark brown your choice. Each blade is number stamped.
Price with Hand stitched Sheath $200.00 plus shipping
Hand forged full tang 1095 High Carbon Steel....6 1/4" inch blade 5" handle.. file worked thumb stops on spine..
Rear exposed steel but end...Tapered forward clip/swedge about 3" long.. 3/16" thick spine/tang.....
Pattern and patina aged finish blade. Handle material Black Dymonwood as shown below or black canvas micarta...
brass pins and lanyard hole. Hand stitched belt sheath with brass snap can be worn in a regular hanging fashion or higher on the belt.
Sheath Available in black as in photo or dark brown your choice. Each blade is number stamped.
Price with Hand stitched Sheath $200.00 plus shipping
| ML Knives Trail fighter Each number stamped |
ML Knives Trail Fighter
Shown with black Dymonwood
Shown with black Dymonwood
TRAIL FIGHTER VIDEOS
Trail Fighter Knife Testing part 1 Batoning and
making Stakes
Trail Fighter Knife Testing part 2 Killer Soda
Cans Cutting
Trail Fighter Knife Testing part 1 Batoning and
making Stakes
Trail Fighter Knife Testing part 2 Killer Soda
Cans Cutting
| custom hand stitched sheath with brass snap..in black or dark brown |
| Large belt loop made to be worn in a regular hanging fashion or higher on the belt. |
Current Delivery date on the Trail Fighter
is OCT 2012
is OCT 2012
File worked Thumb stops on 3/16" Thick Spine